A schedule is a group of general notes, usually grouped in a tabular form according to materials of construction. General notes refer to all notes on the drawing not accompanied by a leader and an arrowhead. Item schedules for doors, rooms, footings, and so on, are more detailed. Typical door and window finish schedule formats are presented in the next section.
Doors may be identified as to size, type, and style with code numbers placed next to each symbol in a plan view. This code number, or mark, is then entered on a line in a door schedule, and the principal characteristics of the door are entered in successive columns along the line. The "Amount Required" column allows a quantity check on doors of the same design as well as the total number of doors required. By using a number with a letter, you will find that the mark serves a double purpose: the number identifies the floor on which the door is located, and the letter identifies the door design. The "Remarks" column allows identification by type (panel or flush), style, and material. The schedule is a convenient way of presenting pertinent data without making the Builder refer to the specification. A typical door schedule is shown in table 2-1.
Table 2-1.Door Schedule
A window schedule is similar to a door schedule in that it provides an organized presentation of the significant window characteristics. The mark used in the schedule is placed next to the window symbol that applies on the plan view of the elevation view (figure 2-13). A similar window schedule is shown in table 2-2.
Table 2-2.Window Schedule
A finish schedule specifies the interior finish material for each room and floor in the building. The finish schedule provides information for the walls, floors, ceilings, baseboards, doors, and window trim. An example of a finish schedule is shown in table 2-3.
Table 2-3.Finish Schedule
Notes are generally placed a minimum of 3 inches below the "Revision" block in the right-hand side of the first sheet. The purpose of these notes is to give additional information that clarifies a detail or explains how a certain phase of construction is to be performed. You should read all notes, along with the specifications, while you are planning a project.
|David L. Heiserman, Editor||
Copyright © SweetHaven
Revised: June 06, 2015