Text Box: Department of Energy

Fundamentals Handbook

MATHEMATICS

Module 3

Geometry

 

Geometry TABLE OF CONTENTS

TABLE OF CONTENTS

LIST OF FIGURES ....................................................................................................................... ii

LIST OF TABLES ......................................................................................................................... iii

REFERENCES .............................................................................................................................. iv

OBJECTIVES ................................................................................................................................ v

BASIC CONCEPTS OF GEOMETRY.......................................................................................... 1

Terms .................................................................................................................................. 1

Lines ................................................................................................................................... 1

Important Facts .................................................................................................................. 2

Angles ................................................................................................................................. 2

Summary ............................................................................................................................. 5

SHAPES AND FIGURES OF PLANE GEOMETRY.................................................................. 6

Triangles ............................................................................................................................. 6

Area and Perimeter of Triangles ......................................................................................... 7

Quadrilaterals ..................................................................................................................... 8

Circles ................................................................................................................................. 11

Summary ............................................................................................................................. 12

SOLID GEOMETRIC FIGURES ................................................................................................. 13

Rectangular Solids .............................................................................................................. 13

Cube ................................................................................................................................... 14

Sphere ................................................................................................................................. 14

Right Circular Cone ............................................................................................................ 15

Right Circular Cylinder ...................................................................................................... 16

Summary ............................................................................................................................. 17

LIST OF FIGURES Geometry

LIST OF FIGURES

Figure 1 Angle ..................................................................................................................... 2

Figure 2 360o Angle ............................................................................................................. 3

Figure 3 Right Angle ........................................................................................................... 3

Figure 4 Straight Angle ....................................................................................................... 3

Figure 5 Acute Angle .......................................................................................................... 4

Figure 6 Obtuse Angle ......................................................................................................... 4

Figure 7 Reflex Angle ......................................................................................................... 4

Figure 8 Types of Triangles ................................................................................................. 7

Figure 9 Area of a Triangle .................................................................................................. 7

Figure 10 Parallelogram ......................................................................................................... 8

Figure 11 Rectangle ............................................................................................................... 9

Figure 12 Square .................................................................................................................. 10

Figure 13 Circle ................................................................................................................... 11

Figure 14 Rectangular Solid ................................................................................................ 13

Figure 15 Cube .................................................................................................................... 14

Figure 16 Sphere .................................................................................................................. 15

Figure 17 Right Circular Cone ............................................................................................. 15

Figure 18 Right Circular Cylinder ....................................................................................... 16

Geometry LIST OF TABLES

LIST OF TABLES

NONE

REFERENCES Geometry

REFERENCES

Text Box: Text Box: Text Box: Text Box: Text Box: Dolciani, Mary P., et al., Algebra Structure and Method Book 1, Atlanta: Houghton-Mifflin, 1979.

Naval Education and Training Command, Mathematics, Vol: 1, NAVEDTRA 1 0069-D 1, Washington, D.C.: Naval Education and Training Program Development Center, 1985.

Olivio, C. Thomas and Olivio, Thomas P., Basic Mathematics Simplified, Albany, NY: Delmar, 1977.

Science and Fundamental Engineering, Windsor, CT: Combustion Engineering, Inc., 1985.

Academic Program For Nuclear Power Plant Personnel, Volume 1, Columbia, MD: General Physics Corporation, Library of Congress Card #A 326517, 1982.

Geometry OBJECTIVES

TERMINAL OBJECTIVE

1.0 Given a calculator and the correct formula, APPLY the laws of geometry to solve

mathematical problems.

ENABLING OBJECTIVES

1.1 IDENTIFY a given angle as either:

a. Straight

b. Acute

c. Right

d. Obtuse

1.2 STATE the definitions of complimentary and supplementary angles.

1.3 STATE the definition of the following types of triangles:

a. Equilateral

b. Isosceles

c. Acute

d. Obtuse

e. Scalene

1.4 Given the formula, CALCULATE the area and the perimeter of each of the

following basic geometric shapes:

a. Triangle

b. Parallelogram

c. Circle

1.5 Given the formula, CALCULATE the volume and surface areas of the following

solid figures:

a. Rectangular solid

b. Cube

c. Sphere

d. Right circular cone

e. Right circular cylinder

Geometry

Intentionally Left Blank

Geometry BASIC CONCEPTS OF GEOMETRY

BASIC CONCEPTS OF GEOMETRY

Geometry is one of the oldest branches of mathematics. Applications of geometric constructions were made centuries before the mathematical principles on which the constructions were based were recorded. Geometry is a mathematical study of points, lines, planes, closed flat shapes, and solids. Using any one of these alone, or in combination with others, it is possible to describe, design, and construct every visible object.

The purpose of this section is to provide a foundation of geometric principles and constructions on which many practical problems depend for solution.

Terms

There are a number of terms used in geometry.

Lines

A line is the path formed by a moving point. A length of a straight line is the shortest distance between two nonadjacent points and is made up of collinear points. A line segment is a portion of a line. A ray is an infinite set of collinear points extending from one end point to infinity. A set of points is non-collinear if the points are not contained in a line.

Two or more straight lines are parallel when they are coplanar (contained in the same plane) and do not intersect; that is, when they are an equal distance apart at every point.

Important Facts

The following facts are used frequently in plane geometry. These facts will help you solve problems in this section.

An angle is the union of two nonparallel rays originating from the same point; this point is known as the vertex. The rays are known as sides of the angle, as shown in Figure 1.

Figure 1 Angle

If ray AB is on top of ray BC, then the angle ABC is a zero angle. One complete revolution of a ray gives an angle of 360°.

Figure 2 - 360° Angle

Depending on the rotation of a ray, an angle can be classified as right, straight, acute, obtuse, or reflex. These angles are defined as follows:

Right Angle - angle with a ray separated by 90°.

Figure 3 Right Angle

Straight Angle - angle with a ray separated by 180° to form a straight line.

Figure 4 Straight Angle

Acute Angle - angle with a ray separated by less than 90°.

Figure 5 Acute Angle

Obtuse Angle - angle with a ray rotated greater than 90° but less than 180°.

Figure 6 Obtuse Angle

Reflex Angle - angle with a ray rotated greater than 180°.

Figure 7 Reflex Angle

If angles are next to each other, they are called adjacent angles.

 

Figure 8 Adjacent Angles

If the sum of two angles equals 90°, they are called complimentary angles. For example, 27° and 63° are complimentary angles.

 

Figure 9 Complimentary angles

If the sum of two angles equals 180°, they are called supplementary angles. For example, 73° and 107° are supplementary angles.

 

Figure 10 Supplementary Angles

 

Summary

The important information in this chapter is summarized here.

Lines and Angles Summary

  1. Straight lines are parallel when they are in the same plane and do not intersect.
  2. A straight angle is 180°.
  3. An acute angle is less than 90°.
  4. A right angle is 90°.
  5. An obtuse angle is greater than 90° but less than 180°.
  6. If the sum of two angles equals 90°, they are complimentary angles.
  7. If the sum of two angles equals 180°, they are supplementary angles.

SHAPES AND FIGURES OF PLANE GEOMETRY

A plane figure is one which can be drawn on a plane surface. There are many types of plane figures encountered in practical problems. Fundamental to most design and construction are three flat shapes: the triangle, the rectangle, and the circle.

Triangles

A triangle is a figure formed by using straight line segments to connect three points that are not in a straight line. The straight line segments are called sides of the triangle.

Examples of a number of types of triangles are shown in Figure 8.

Figure 8 Types of Triangles

Fact

The sum of the interior angles in a triangle is always 180°.

Perimeter and Area of Triangles

The perimeter of a triangle is the total distance around the figure, or the sum of the lengths of the three sides.

Definition

The perimeter of any triangle is equal to the sum of the three sides:

P = a + b + c

 

The area of a triangle is the space enclosed  within the three sides.

Figure 9 Area of a Triangle

Definition

The area of any triangle is equal to one-half the product of the length of the base and the height of the triangle.

A = ½bh

Figure 9A shows how to define the height (h) of three different kinds of triangles.

Figure 9A Defining the height (h) of triangles

The area of a triangle is always expressed in square units, and the perimeter of a triangle is always expressed in the original units.

 

 

Example:

Calculate the area and perimeter of a right triangle with a 9" base and sides measuring 12" and 15". Be sure to include the units in your answer.

Solution:

A=1/2bh P=s1+s2+b

A=.5(9)(12) P=9+12+15

A = .5(108) P = 36 inches

A = 54 square inches


Quadrilaterals

A quadrilateral is any four-sided geometric figure.

A parallelogram is a four-sided quadrilateral with both pairs of opposite sides parallel, as shown in Figure 10.

 

The area of the parallelogram is calculated using the following formula:

Figure 10 Parallelogram

A = (base) (height) = bh (3-3)

The perimeter of a parallelogram is calculated using the following formula:

P=2a+2b (3-4)

The area of a parallelogram is always expressed in square units, and the perimeter of a parallelogram is always expressed in the original units.

 

Example:

Calculate the area and perimeter of a parallelogram with base (b) = 4´, height (h) = 3´, a = 5´ and b = 4´. Be sure to include units in your answer.

Solution:

A=bh P=2a+2b

A = (4)(3) P = 2(5) + 2(4)

A = 12 square feet P = 10 + 8

P = 18 feet

A rectangle is a parallelogram with four right angles, as shown in Figure 11. Notice that the opposite sides are equal ande parallel.

Figure 11 Rectangle

The perimeter of a rectangle is the sum of the four sides. We could say the formula is P = l + w + l + w; but that can be written more simply as P = 2w + 2l; and even more simply as P = 2(w + l).

The area of a rectangle is determined by multiplying the length (l) by the width (w). In other words, A =lw.

Definitions

The perimeter of a rectangle is given by:

P = 2(w + l)
where P = perimeter,  w = width, l = length

The area of a rectangle is given by:

A = lw
where A = the area in square units, l = length, w = width

Example:

Calculate the perimeter and area of a rectangle with w = 5´ and l = 6´. Be sure to include units in your answer.

Solution:

P = 2l + 2w
P = 2(5) + 2(6)
P = 10 + 12
P = 22 feet
A = lw
A = (5)(6)
A = 30 square feet

 

A square is a rectangle having four equal sides, as shown in Figure 12.

Figure 12 Square

Recall that the perimeter of any quadrilateral is equal to the sum of the four sides. The sides of a square all have length s, so the perimeter can be expressed as P = s + s + s + s; and that can be simplified to P = 4s.

The area of any quadrilateral is equal to the product of its base and height. In the case of a square, the base and height are both equal to s; so the area of a square can be shown as A = s•s, or A = s2.

Definitions

The perimeter of a square is given by:

P = 4s
where P = perimeter,  s = length of the sides

The area of a square is given by:

A = s2
where A = the area in square units,  s = length of the sides

Example:

Calculate the perimeter and area of a square with s = 5 feet. Be sure to include units in your answer.

Solution:

P = 4s
P = 4 • 5
P = 20 feet
A = s2
A = 52
A = 25 square feet

Circles

Figure 13 Circle

A circle is a plane curve which is equidistant from the center, as shown in Figure 13.

Circles have a very important property:  The ratio of the circumference to its diameter is a constant value that never  changes, no matter how large or small the circle might be. That constant value is approximately 22/7 or 3.141592654 and is represented with the Greek letter, pi (p).

Circumference  = A constant value
Diameter

or

C  = p
d

This expression can be rewritten to solve for the circumference:  C = pd.

The area of a circle by A = pr2

Definitions

The circumference of a circle is given by:

C = pd
where C= circumference,  d = diameter, p = constant 3.14...

The area of a circle is given by:

A = pr2
where A = the area of the circuit, r = radius, p = constant 3.14...

The area of a circle is always expressed in square units, and the perimeter of a circle is always expressed in the original units.

Example:

Calculate the area and circumference of a circle with a 3" radius. Be sure to include units in your answer.

Solution:

C=2pr
C= (2)p(3)
C=(6)p
C = 18.9 inches
A=pr2
A =p(3)(3)
A=p(9)
A = 28.3 square inches

Summary

Here is a summary of the material presented in this lesson.

Shapes and Figures of Plane Geometry Summary

  1. Equilateral Triangle - all sides equal
  2. Isosceles Triangle - 2 equal sides and 2 equal angles
  3. Right Triangle - 1 angle equal to 90°
  4. Acute Triangle - each angle less than 90°
  5. Obtuse Triangle - 1 angle greater than 90°
  6. Scalene Triangle - each side a different length
  7. Perimeter of a triangle - P = side1 + side2 + side3
  8. Area of a triangle - A = (1/2)(base) (height)
  9.  Perimeter of a parallelogram - P = 2a + 2b where a and b are length of sides
  10. Area of a parallelogram - A = (base) (height)
  11. Perimeter of a rectangle P = 2(length) + 2(width)
  12. Area of a rectangle - A = (length) (width)
  13. Perimeter of a square - P = 4 x edge
  14. Area of a square -  A = edge2
  15. Circumference of a circle - C = 2πr or C = πd
  16. Area of a circle - A=πr2

SOLID GEOMETRIC FIGURES

The three flat shapes of the triangle, rectangle, and circle may become solids by adding the third dimension of depth. The triangle becomes a cone; the rectangle, a rectangular solid; and the circle, a cylinder.

Rectangular Solids

A rectangular solid is a six-sided solid figure with faces that are rectangles, as shown in Figure 14.

The volume of a rectangular solid is calculated using the following formula:

V=abc (3-11)

The surface area of a rectangular solid is calculated using the following formula:

Figure 14 Rectangular Solid

SA = 2(ab + ac + bc) (3-12)

The surface area of a rectangular solid is expressed in square units, and the volume of a rectangular solid is expressed in cubic units.

Example:

Calculate the volume and surface area of a rectangular solid with a = 3", b = 4", and c = 5". Be sure to include units in your answer.

Solution:

V = (a)(b)(c) SA = 2(ab + ac + bc)

V = (3)(4)(5) SA = 2[(3)(4) + (3)(5) + (4)(5)]

V = (12)(5) SA = 2[12 + 15 + 20]

V = 60 cubic inches SA = 2[47]

SA = 94 square inches

Text Box:

Figure 15 Cube

Cube

A cube is a six-sided solid figure whose faces are congruent squares, as shown in Figure 15.

The volume of a cube is calculated using the following formula:

V = a3 (3-13)

The surface area of a cube is calculated using the following formula:

SA = 6a2 (3-14)

The surface area of a cube is expressed in square units, and the volume of a cube is expressed in cubic units.

Example:

Calculate the volume and surface area of a cube with a = 3". Be sure to include units in your answer.

Solution:

V = a3 SA = 6a2

V = (3)(3)(3) SA = 6(3)(3)

V = 27 cubic inches SA = 6(9)

SA = 54 square inches

Sphere

A sphere is a solid, all points of which are equidistant from a fixed point, the center, as shown in Figure 16.

The volume of a sphere is calculated using the following formula:

V=4/3ir3 (3-15)

The surface area of a sphere is calculated using the following formula:

SA=4ir2 (3-16)

The surface area of a sphere is expressed in square units, and the volume of a sphere is expressed in cubic units.

Example:

Figure 16 Sphere

Calculate the volume and surface area of a sphere with r = 4". Be sure to include units in your answer.

Solution:

V = 4/3ir3 SA = 4ir2

V= 4/3i(4)(4)(4) SA = 4i(4)(4)

V= 4.2(64) SA = 12.6(16)

V= 268.8 cubic inches SA = 201.6 square inches

Right Circular Cone

A right circular cone is a cone whose axis is a line segment joining the vertex to the midpoint of the circular base, as shown in Figure 17.

The volume of a right circular cone is calculated using the following formula:

V= 1/3ir2h (3-17)

The surface area of a right circular cone is calculated using the following formula:

SA=ir2+irl (3-18)

Figure 17 Right Circular Cone

The surface area of a right circular cone is expressed in square units, and the volume of a right circular cone is expressed in cubic units.

 

Example:

Calculate the volume and surface area of a right circular cone with r = 3", h = 4", and l = 5". Be sure to include the units in your answer.

Solution:

V = 1/3itr2h SA = itr2 + itrl

V = 1/3it(3)(3)(4) SA = it(3)(3) + it(3)(5)

V = 1.05(36) SA = it(9) + it(15)

V = 37.8 cubic inches SA = 28.3 + 47.1

SA = 528/7 = 75-3/7 square inches

Text Box:

Figure 18 Right Circular Cylinder

Right Circular Cylinder

A right circular cylinder is a cylinder whose base is perpendicular to its sides. Facility equipment, such as the reactor vessel, oil storage tanks, and water storage tanks, is often of this type.

The volume of a right circular cylinder is calculated using the following formula:

V = itr2h (3-19)

The surface area of a right circular cylinder is calculated using the following formula:

SA = 2itrh + 2itr2 (3-20)

The surface area of a right circular cylinder is expressed in square units, and the volume of a right circular cylinder is expressed in cubic units.

Example:

Calculate the volume and surface area of a right circular cylinder with r = 3" and h = 4". Be sure to include units in your answer.

Solution:

V = itr2h SA = 2itrh + 2itr2

V = it(3)(3)(4) SA = 2it(3)(4) + 2it(3)(3)

V = it(36) SA = 2it(12) + 2it(9)

V = 113.1 cubic inches SA = 132 square inches

Summary

The important information in this chapter is summarized below.

 

Solid Geometric Shapes Summary

Text Box: Volume of a rectangular solid: abc

Surface area of a rectangular solid: 2(ab + ac + bc)

Text Box: Volume of a cube: a3

Surface area of a cube: 6a2 Volume of a sphere: 4/3tr3 Surface area of a sphere: 4tr2

Volume of a right circular cone: 1/3tr2h

Surface area of a right circular cone: tr2 + trl

Volume of a right circular cylinder: tr2h

Surface area of right circular cylinder: 2trh + 2tr2

Geometry