Department of Energy
Fundamentals Handbook
MATHEMATICS
Module 4
Trigonometry
Trigonometry TABLE OF CONTENTS
TABLE OF CONTENTS
LIST OF FIGURES ii
LIST OF TABLES iii
REFERENCES iv
OBJECTIVES v
PYTHAGOREAN THEOREM 1
Pythagorean Theorem 1
Summary 3
TRIGONOMETRIC FUNCTIONS 4
Inverse Trigonometric Functions 6
Summary 8
RADIANS 9
Radian Measure 9
Summary 10
LIST OF FIGURES Trigonometry
LIST OF FIGURES
Figure 1 Triangle 1
Figure 2 Right Triangle 4
Figure 3 Example Problem 5
Figure 4 Radian Angle 9
Trigonometry LIST OF TABLES
LIST OF TABLES
NONE
REFERENCES Trigonometry
REFERENCES
Academic Program For Nuclear Power Plant Personnel, Volume 1, Columbia, MD: General Physics Corporation, Library of Congress Card #A 326517, 1982.
Drooyan, I. and Wooton, W., Elementary Algebra and College Students, 6th Edition, John Wiley & Sons, 1984.
Ellis, R. and Gulick, D., College Algebra and Trigonometry, 2nd Edition, Harcourt Brace Jouanovich, Publishers, 1984.
Rice, B.J. and Strange, J.D., Plane Trigonometry, 2nd Edition, Prinole, Weber & Schmidt, Inc., 1978.
Trigonometry OBJECTIVES
TERMINAL OBJECTIVE
1.0 Given a calculator and a list of formulas, APPLY the laws of
trigonometry to
solve for unknown values.
ENABLING OBJECTIVES
1.1 Given a problem, APPLY the Pythagorean theorem to solve for the
unknown
values of a right triangle.
1.2 Given the following trigonometric terms, IDENTIFY the related function:
Sine
Cosine
Tangent
Cotangent
Secant
Cosecant
1.3 Given a problem, APPLY the trigonometric functions to solve for the unknown.
1.4 STATE the definition of a radian.
Trigonometry
Intentionally Left Blank
Trigonometry PYTHAGOREAN THEOREM
This chapter covers right triangles and solving for unknowns using the Pythagorean theorem.
EO 1.1 Given a problem, APPLY the Pythagorean theorem
to
solve for the unknown values of a right triangle.
Trigonometry is the branch of mathematics that is the study of angles and the relationship between angles and the lines that form them. Trigonometry is used in Classical Physics and Electrical Science to analyze many physical phenomena. Engineers and operators use this branch of mathematics to solve problems encountered in the classroom and on the job. The most important application of trigonometry is the solution of problems involving triangles, particularly right triangles.
Trigonometry is one of the most useful branches of mathematics. It is used to indirectly measure distances which are difficult to measure directly. For example, the height of a flagpole or the distance across a river can be measured using trigonometry.
Figure 1 Triangle
As shown in Figure 1 below, a triangle is a plane figure formed using straight line segments (AB, BC, CA) to connect three points (A, B, C) that are not in a straight line. The sum of the measures of the three interior angles (a', b', c') is 180°, and the sum of the lengths of any two sides is always greater than or equal to the third.
Pythagorean Theorem
The Pythagorean theorem is a tool that can be used to solve for unknown values on right triangles. In order to use the Pythagorean theorem, a term must be defined. The term hypotenuse is used to describe the side of a right triangle opposite the right angle. Line segment C is the hypotenuse of the triangle in Figure 1.
The Pythagorean theorem states that in any right triangle, the square of the length of the hypotenuse equals the sum of the squares of the lengths of the other two sides.
. (4-1)
This may be written as c = a+ b or
222
= +
PYTHAGOREAN THEOREM Trigonometry
Example:
The two legs of a right triangle are 5 ft and 12 ft. How long is the hypotenuse? Let the hypotenuse be c ft.
a2 + b2 = c2
122 + 52 = c2
144 + 25 = c2
169 = c2
169 c
13 ft = c
Using the Pythagorean theorem, one can determine the value of the unknown side of a right triangle when given the value of the other two sides.
Example:
Given that the hypotenuse of a right triangle is 18" and the length of one side is 11", what is the length of the other side?
|
a2 |
b2 | c2 |
|
112 |
b2 | 182 |
|
b2 |
182 | 112 |
|
b2 |
324 | 121 |
b 203
b 14.2 in
Trigonometry PYTHAGOREAN THEOREM
Summary
The important information in this chapter is summarized below.
Pythagorean Theorem Summary
The Pythagorean theorem states that in any right triangle, the square of the length of the hypotenuse equals the sum of the squares of the lengths of the other two sides.
This may be written as c2 = a2+ b2 or .
TRIGONOMETRIC FUNCTIONS Trigonometry
This chapter covers the six trigonometric functions and solving right triangles.
EO 1.2 Given the following trigonometric terms,
IDENTIFY the
related function:
Sine
Cosine
Tangent
Cotangent
Secant
Cosecant
EO 1.3 Given a problem, APPLY the trigonometric
functions to
solve for the unknown.
As shown in the previous chapter, the lengths of the sides of right triangles can be solved using the Pythagorean theorem. We learned that if the lengths of two sides are known, the length of the third side can then be determined using the Pythagorean theorem. One fact about triangles is that the sum of the three angles equals 180°. If right triangles have one 90° angle, then the sum of the other two angles must equal 90°. Understanding this, we can solve for the unknown angles if we know the length of two sides of a right triangle. This can be done by using the six trigonometric functions.
Figure 2 Right Triangle
In right triangles, the two sides (other than the hypotenuse) are referred to as the opposite and adjacent sides. In Figure 2, side a is the opposite side of the angle è and side b is the adjacent side of the angle è. The terms hypotenuse, opposite side, and adjacent side are used to distinguish the relationship between an acute angle of a right triangle and its sides. This relationship is given by the six trigonometric functions listed below:
opposite
(4-2)
(4-3)
sine θa
c hypotenuse
adjacent
cosine θb
c hypotenuse
Trigonometry TRIGONOMETRIC FUNCTIONS
b
opposite adjacent
hypotenuse
(4-4)
(4-5)
(4-6)
(4-7)
tangent è a
cosecant è c
b oposite
secant è c
hypotenuse
a adjacent
adjacent opposite
cotangent è b
a
The trigonometric value for any angle can be determined easily with the aid of a calculator. To find the sine, cosine, or tangent of any angle, enter the value of the angle into the calculator and press the desired function. Note that the secant, cosecant, and cotangent are the mathematical inverse of the sine, cosine and tangent, respectively. Therefore, to determine the cotangent, secant, or cosecant, first press the SIN, COS, or TAN key, then press the INV key.
Example:
Determine the values of the six trigonometric functions of an angle formed by the x-axis and a line connecting the origin and the point (3,4).
Solution:
To help to "see" the solution of the problem it helps to plot the points and construct the right triangle.
Figure 3 Example Problem
Label all the known angles and sides, as shown in Figure 3.
From the triangle, we can see that two of the sides are known. But to answer the problem, all three sides must be determined. Therefore the Pythagorean theorem must be applied to solve for the unknown side of the triangle.
TRIGONOMETRIC FUNCTIONS Trigonometry
| x 3 y 4 |
|||
r x2 y2 32 42
r 9 16 25 5
Having solved for all three sides of the triangle, the trigonometric functions can now be
|
determined. solve. |
Substitute the values for x, y, and r into the trigonometric functions and | ||
| sinè | y | 4 | 0.800 |
| r | 5 | ||
| cos è | x | 3 | 0.600 |
| r | 5 | ||
| tanè | y | 4 | 1.333 |
| x | 3 | ||
| csc è | r | 5 | 1.250 |
| y | 4 | ||
| sec è | r | 5 | 1.667 |
| x | 3 | ||
| cot è | x | 3 | 0.750 |
| y | 4 | ||
Although the trigonometric functions of angles are defined in terms of lengths of the sides of right triangles, they are really functions of the angles only. The numerical values of the trigonometric functions of any angle depend on the size of the angle and not on the length of the sides of the angle. Thus, the sine of a 30° angle is always 1/2 or 0.500.
Inverse Trigonometric Functions
When the value of a trigonometric function of an angle is known, the size of the angle can be found. The inverse trigonometric function, also known as the arc function, defines the angle based on the value of the trigonometric function. For example, the sine of 21° equals 0.35837; thus, the arc sine of 0.35837 is 21°.
Trigonometry TRIGONOMETRIC FUNCTIONS
There are two notations commonly used to indicate an inverse trigonometric function.
arcsin 0.35837 21°
sin 1 0.35837 21°
The notation arcsin means the angle whose sine is. The notation arc can be used as a prefix to any of the trigonometric functions. Similarly, the notation sin-1 means the angle whose sine is. It is important to remember that the -1 in this notation is not a negative exponent but merely an indication of the inverse trigonometric function.
To perform this function on a calculator, enter the numerical value, press the INV key, then the SIN, COS, or TAN key. To calculate the inverse function of cot, csc, and sec, the reciprocal key must be pressed first then the SIN, COS, or TAN key.
Examples:
Evaluate the following inverse trigonometric functions.
| arctan 0.4663 | 25° |
| arccos 0.3746 | 68° |
| arcsin 0.3584 | 21° |
arcsin 0.3746 22°
arccos 0.3746 69°
arctan 0.3839 21°
1
arccot 2.1445 arctan
2. 1445
1
arcsec 2.6695 arccos
2.6695
1
arccsc 2.7904 arcsin
2. 7 904
TRIGONOMETRIC FUNCTIONS Trigonometry
Summary
Trigonometric Functions Summary
The six trigonometric functions are:
sine 0a
c hypotenuse
cosine 0b
c hypotenuse
opposite
adjacent
cosecant 0 c
hypotenuse
b opposite
secant 0 c
hypotenuse
a adjacent
tangent 0 a
opposite adjacent
cotangent 0 b
a
adjacent opposite
b
The important information in this chapter is summarized below.
Trigonometry RADIANS
This chapter will cover the measure of angles in terms of radians and degrees. EO 1.4 STATE the definition of a radian.
Radian Measure
The size of an angle is usually measured in degrees. However, in some applications the size of an angle is measured in radians. A radian is defined in terms of the length of an arc subtended by an angle at the center of a circle. An angle whose size is one radian subtends an arc whose length equals the radius of the circle. Figure 4 shows ∠BAC whose size is one radian. The length of arc BC equals the radius r of the circle. The size of an angle, in radians, equals the length of the arc it subtends divided by the radius.
Figure 4 Radian Angle
| Length of Arc Radians Radius |
(4-8) |
One radian equals approximately 57.3 degrees. There are exactly 2ð radians in a complete revolution. Thus 2ð radians equals 360 degrees: ð radians equals 180 degrees.
Although the radian is defined in terms of the length of an arc, it can be used to measure any angle. Radian measure and degree measure can be converted directly. The size of an angle in degrees is changed to radians by multiplying
by . The size of an angle in radians is changed to
ð
180
180
.
π
degrees by multiplying by
068.6°⎛⎜⎝
| ⎞⎟⎠ | (68.6)ð | 1.20 radians | ||
| 180 |
π
180
Example:
Change 68.6° to radians.
RADIANS Trigonometry
Example:
Change 1.508 radians to degrees.
| (1.508 radians)⎛⎜⎝ | 180 | ⎞⎟⎠ | (1.508)(180) it |
86.4° | ||
| it |
Summary
The important information in this chapter is summarized below.
Radian Measure Summary
A radian equals approximately 57.3o and is defined as the angle subtended by an arc whose length is equal to the radius of the circle.
Length of arc Radian =
Radius of circle it radians = 180°